Custom Akylux board

Which thickness for your Akylux board?

Akylux is a corrugated polypropylene: two skins joined by flutes, like corrugated cardboard that is not afraid of water. 3.5 mm is the standard thickness for signage — it can be screwed, fixed with double-sided tape or attached to a barrier with cable ties. 10 mm doubles the rigidity: it is the one you need as soon as a board exceeds a metre or has to stand on its own without a support, otherwise it warps in the wind. Recycled Akylux 3 mm does the same job with a second-life material, useful when your public tender or brand guidelines require it.

Sizes available

Seventy-six sizes are available, from 10 x 20 cm for discreet directional signs up to the large dimensions of a site board. The intermediate sizes — 30 x 40, 40 x 60, 45 x 70 — cover statutory notices and site signage. If none fits, enter your own height and width: the board is cut to order, with a straight cut or contour cut if your graphic has a particular outline, an arrow for example.

Printing, fixing and finishes

Printing is single or double-sided, depending on whether the board is seen from one side only or from both directions of a street. Five ink options are available, including photo-quality CMYK for rich graphics and CMYK + white when the material must stay opaque. For fixing, eyelets go at each corner — the most common choice — or at regular intervals along one or more sides, which spreads the load on a fence and stops the board flapping. A gloss or matt protective laminate adds a UV and scratch barrier; anti-graffiti and dry-wipe versions exist for exposed locations or boards people write on. Rounded corners are recommended whenever a board is at a child's height.

Preparing your file

Work in CMYK, at 300 DPI, with 2 mm bleed and a 4 mm safety margin. On a board read from the street, favour large type and strong contrast: at five metres, a sharp logo and three lines are worth more than a full description. If you want a contour cut, supply the cutting path on a separate layer, or describe the shape you want and the workshop will build it.

2M Numérique at your side

Your board is prepared in our Manciet workshop, in the Gers, 100% Made In Occitanie. Three lead times are offered, from standard to express, to suit your fitting date.