Fabric display wall
A fabric display wall closes the back of your stand with one seamless image. A straight or curved tubular frame carries a stretch-knit cover that slides on like a garment and tensions itself. Trade shows, congresses, showrooms and reception halls use it as their main backdrop. The cover can be replaced on its own from one event to the next, with no new frame to buy.
- Eight sizes, from 235 x 238 cm to 595 x 238 cm.
- 260 g/m2 stretch knit fabric, printed edge to edge.
- Double-sided, straight or curved frame, optional blackout lining.
Configure my product
Loading options…
Templates & instructions
Technical sheet
- Resolution
- 300 DPI
- Colours
- CMYK
- Bleed
- 2 mm
- Safety margin
- 4 mm
Which fabric for your display wall?
The wall uses a 260 g/m2 stretch-knit cover. The fabric gives in both directions: it follows the tubular frame and transport creases disappear once tension is applied. Knit diffuses light rather than bouncing it, so no hot spots appear under exhibition-hall spotlights. If your artwork has dark backgrounds, or the stand sits against a lit partition, add the blackout lining behind the print to stop light coming through.
Available sizes
235 x 238 cm covers a corner stand or a 6 m2 space, the most common size at regional shows.
295 x 238 cm matches a 9 m2 stand and leaves room for a counter in front.
395, 495 and 595 x 238 cm build a continuous backdrop across wide stands, in place of a painted partition.
Height stays at 238 cm across the range, a dimension most exhibition halls accept.
Frame, double-sided printing and reprints
The straight shape gives a flat backdrop; the horizontally curved shape wraps the space slightly and frames photographs better. Double-sided printing carries a different message on each face when the stand is walked through, or the same image on both when it faces two aisles. Already own the frame? Order the printed cover alone: the same structure then carries a new message each season, within our stands range.
Preparing your file
Supply CMYK artwork at 300 DPI, with 2 mm bleed and a 4 mm safety margin. Keep logos and text away from the edges: the cover folds behind the tubes all round.
2M Numérique at your side
Your display wall is prepared in our workshop in Manciet, in the Gers, 100 % Made In Occitanie: see our responsible approach. We check the scale and framing of your artwork before production starts.
Made here
94 % of our orders were produced in-house in 2024-2025, and 100 % in France. Our workshop is in Manciet, in the Gers, near Nogaro — recent machinery, local workshops. Less transport, faster turnaround.
Committed suppliers
We source our materials from regional partners who share our standards. Our main textile supplier is a French manufacturer whose site in Hagetmau, in the neighbouring Landes, supplies us through a short circuit — EcoVadis Platinum 2024, organic cotton and recycled textile ranges certified GOTS and GRS. Our paper comes from sustainably managed forests.
Less waste
PVC offcuts, paper and substrates are sorted and recovered; our adhesive films are available in recycled PVC. Nesting and imposition of files cut offcuts down: we print the right quantity. And low-impact inks, for prints that last.
A person, not a form
A close-knit team, from the first idea to the finished product. Every project, large or small, gets the same care. A question about your file? +33 5 33 13 02 01.
You might also like
Triangular cardboard totem
From €36.00
Elliptical cardboard totem
From €44.40
X-banner stand
From €22.80
Cardboard cube totem
From €52.80
Premium fabric totem
From €130.80
In the same category
Folding LED counter
From €114.00
Pop-up counter
From €122.40
Curved PVC counter
From €50.40
Free-standing fabric frame
From €22.80
Hanging banner sign
From €422.40
Hanging banner
From €24.00
L-Banner stand
From €33.60
Custom printed tablecloths
From €31.20
Photocall backdrop
From €184.80
Pop-up display stand
From €129.60
Folding LED light totem
From €186.00
LED light totem
From €211.20