Advertising banner
A facade or site banner stays up for the long haul, exposed to gusts and bad weather. We make it to your exact dimensions, portrait or landscape, in our Manciet workshop, with the material and finishes your structure allows.
- Eco 340 and 450 g/m² banner, Pro 510 g/m² M1-coated
- Perforated 370 g/m² Mesh for heavily exposed facades
- Perimeter reinforcement, eyelets, tensioners, pole pockets and keder
Configure my product
Loading options…
Templates & instructions
Technical sheet
- Resolution
- 300 DPI
- Colours
- CMYK
- Bleed
- 2 mm
- Safety margin
- 4 mm
Choose the weight before the size
Three materials cover most large format work: Eco 340 g/m², Eco 450 g/m² and Pro 510 g/m² M1-coated. We will not claim here how many months one or the other lasts: durability depends on your facade, how exposed it is and the tension your structure allows, not on a figure on a product sheet. Describe the wall or scaffolding and the fixing height: we will reply with a specific material, and tell you why that one. That way you do not pay for a heavier weight just in case, and you do not discover one that is too light on the day the wind gets up.
Perforated Mesh, when the facade takes the full force of the wind
A solid banner stretched across an exposed facade behaves like a sail: the wind does not pass through it, it pushes it, and the fixing points take the strain. The 370 g/m² wind-resistant Mesh is perforated, so air passes through and the pressure drops. In practice, you get a banner that flaps less, a structure under less stress and a graphic that stays taut. It is the option to consider whenever the support is high, open or on a street corner.
Perimeter reinforcement, the edge that decides what happens next
On a large format, a banner almost never gives way in the middle: it fails at a torn-out eyelet or a fraying edge. Perimeter reinforcement deals precisely with that border, where all the pulling force is concentrated, and gives the eyelets something to hold on to. We recommend it whenever the material is stretched outdoors on a structure; for your exact size, call us rather than deciding by guesswork.
What takes up the tension once the banner is in place
You decide which side to fit with eyelets, the spacing between them and how many per graphic: on a large banner, these three settings decide where the load is spread. Add tensioners, as many as you like: these are what you adjust when the banner slackens, without taking anything down. Pole pockets, keder and hook-and-loop adhesive tape are also available if your structure does not suit eyelets. Describe your support to us: it dictates the finish, not the other way round.
Your dimensions, your fitting date, our machines in Manciet
Height and width are entered freely, in centimetres, in portrait or landscape: you are not limited to a catalogue size, and you can order several copies of the same graphic. Lead time is chosen when you order, standard, express or urgent, to suit your fitting date. Everything is printed and finished here, in Manciet, in the Gers: 100% Made In Occitanie, from file to dispatch.
| Material | 12 materials to choose from |
|---|---|
| Available formats | 1757 formats, from 20 × 30 to 200 × 300 cm |
| Custom dimensions | Yes, to the nearest centimetre |
| Quantities | from 1 to 500 copies |
| Production times | Express, Standard, Urgent |
Made here
94 % of our orders were produced in-house in 2024-2025, and 100 % in France. Our workshop is in Manciet, in the Gers, near Nogaro — recent machinery, local workshops. Less transport, faster turnaround.
Committed suppliers
We source our materials from regional partners who share our standards. Our main textile supplier is a French manufacturer whose site in Hagetmau, in the neighbouring Landes, supplies us through a short circuit — EcoVadis Platinum 2024, organic cotton and recycled textile ranges certified GOTS and GRS. Our paper comes from sustainably managed forests.
Less waste
PVC offcuts, paper and substrates are sorted and recovered; our adhesive films are available in recycled PVC. Nesting and imposition of files cut offcuts down: we print the right quantity. And low-impact inks, for prints that last.
A person, not a form
A close-knit team, from the first idea to the finished product. Every project, large or small, gets the same care. A question about your file? +33 5 33 13 02 01.
You might also like
Professional nameplate
From €100.80
Site board
From €39.60
Corrugated board
From €61.20
Planning permission board
From €39.60
Printing on cardboard
From €61.20
Shop sign
From €93.60
In the same category
Custom printed gazebo
From €1,011.60
Custom printed deckchair
From €73.20
Inflatable column
From €259.20
Custom folding screen
From €69.60
Branded parasol
From €256.80
Self-adhesive vinyl
From €32.40
Window graphics and perforated film
From €32.40
Custom Akylux board
From €39.60
Dibond aluminium panel
From €93.60
Foam PVC board
From €57.60
Plexiglass plaque
From €100.80
Estate agent board
From €39.60