Hanging banner
A hanging banner shows a large graphic without taking up any floor space. Fixed to a ceiling, a beam or a railing, it marks out a stand, a shop entrance, a meeting room or a reception hall. We print graphics from 40 x 100 cm up to 200 x 200 cm, with or without the hanging hardware. It belongs to our exhibition stand range.
- Sizes from 40 x 100 cm to 200 x 200 cm, portrait or square
- Materials: 200 gsm photo poster, M1 fire-rated, grey-backed fire-rated polyester
- Grey rails from 40 to 200 cm, black in 60 and 100 cm, or print only
Configure my product
Loading options…
Templates & instructions
Technical sheet
- Resolution
- 300 DPI
- Colours
- CMYK
- Bleed
- 2 mm
- Safety margin
- 4 mm
Which printed material for your hanging banner?
The 200 gsm photo poster gives the finest result: gradients and photographs come out crisply, for indoor use. The M1 fire-rated materials answer the requirements of public venues, exhibition halls and multi-purpose rooms where a fire classification is asked for at the door. Grey-backed fire-rated polyester adds an opaque layer behind the print: that is the one to choose when the banner hangs in the middle of a room, is seen from both sides, or is lit from behind. A no-material option exists if you are ordering hardware alone.
Sizes available
The 40 x 100 and 40 x 150 cm sizes make a narrow column, ideal between two windows or along a pillar. The 100 x 100, 120 x 100, 150 x 100 and 200 x 100 cm sizes cover horizontal strips above a counter. Heights of 150 and 200 cm, in widths of 100, 120, 150 and 200 cm, give the large welcome panels you read from the back of a room. The 200 x 200 cm square closes off the back of a stand on its own.
Hardware and replacements
The hanging rail is chosen to match the width of the graphic: grey in 40, 60, 100, 120, 150 and 200 cm, black in 60 and 100 cm. You can also order the print alone if you are reusing an existing rail, or the rail alone as a replacement.
Preparing your file
Work at 300 DPI at final scale, or proportionally reduced, in CMYK, with 2 mm bleed and a 4 mm safety margin. Leave a quiet strip at the top and bottom, where the fixing profiles sit.
2M Numérique at your side
Your hanging banners are made in Manciet, in the Gers, 100% Made In Occitanie; our responsible approach tells that story. We check image resolution before printing and steer you towards the right material. The full exhibition stand range is here.
Made here
94 % of our orders were produced in-house in 2024-2025, and 100 % in France. Our workshop is in Manciet, in the Gers, near Nogaro — recent machinery, local workshops. Less transport, faster turnaround.
Committed suppliers
We source our materials from regional partners who share our standards. Our main textile supplier is a French manufacturer whose site in Hagetmau, in the neighbouring Landes, supplies us through a short circuit — EcoVadis Platinum 2024, organic cotton and recycled textile ranges certified GOTS and GRS. Our paper comes from sustainably managed forests.
Less waste
PVC offcuts, paper and substrates are sorted and recovered; our adhesive films are available in recycled PVC. Nesting and imposition of files cut offcuts down: we print the right quantity. And low-impact inks, for prints that last.
A person, not a form
A close-knit team, from the first idea to the finished product. Every project, large or small, gets the same care. A question about your file? +33 5 33 13 02 01.
You might also like
Premium fabric totem
From €130.80
Triangular cardboard totem
From €36.00
Elliptical cardboard totem
From €44.40
Cardboard cube totem
From €52.80
X-banner stand
From €22.80
In the same category
Folding LED counter
From €114.00
Pop-up counter
From €122.40
Curved PVC counter
From €50.40
Free-standing fabric frame
From €22.80
Hanging banner sign
From €422.40
L-Banner stand
From €33.60
Custom printed tablecloths
From €31.20
Photocall backdrop
From €184.80
Pop-up display stand
From €129.60
Fabric display wall
From €237.60
Folding LED light totem
From €186.00
LED light totem
From €211.20