Custom printed tablecloths
A custom printed tablecloth turns an ordinary table into brand surface: logo, strapline and colours run across the whole visible drop. It works on a trade-show stand, a farmers' market pitch, an open day or an awards night. The fabric is printed and then made up to the chosen size, with a hemmed edge all round that holds the cut over time.
- Five sizes: 100x100, 150x150, 150x200, 150x260 and 350x170.
- Decotex 220 g/m2 or standard 210 g/m2 fabric, both fire-rated M1.
- Single-sided print across the full surface, hemmed on four sides.
Configure my product
Loading options…
Templates & instructions
Technical sheet
- Resolution
- 300 DPI
- Colours
- CMYK
- Bleed
- 2 mm
- Safety margin
- 4 mm
Which fabric for your custom printed tablecloth?
Two fabrics are offered. The 210 g/m2 standard covers occasional use: an open day, a forum, a market pitch. Decotex 220 g/m2 is denser; it hangs straighter over the table edges and stands up better to a full season of handling. Both carry the French M1 fire rating, which exhibition organisers regularly ask for in their venue rules. In both cases the cloth is hemmed on all four sides.
Available sizes
100x100 dresses a side table or a small welcome pedestal, with a short drop.
150x150 and 150x200 match the folding tables most often found on stands and refreshment points.
150x260 leaves a generous drop at the sides and hides whatever is stored underneath.
350x170 is made for the long tables of banquets, club dinners and buffets.
Printing and finishing
Printing is single-sided across the whole surface, so the artwork runs edge to edge, including the sides that hang down. Place your logo on the front face, the one visitors see standing up, rather than in the middle of the top where brochures, samples and laptops will cover it. A second, smaller mark on each side keeps the brand visible when the table is approached from the aisle.
Preparing your file
CMYK artwork at 300 DPI, 2 mm bleed and a 4 mm safety margin. Mark where the cloth folds over the table edges: text sitting on a fold becomes unreadable once the cloth is on.
2M Numérique at your side
We prepare your tablecloth in Manciet, in the Gers, 100 % Made In Occitanie; our responsible approach explains what that covers. Send us your table dimensions if you are hesitating between two sizes, and browse the rest of the stands range.
Made here
94 % of our orders were produced in-house in 2024-2025, and 100 % in France. Our workshop is in Manciet, in the Gers, near Nogaro — recent machinery, local workshops. Less transport, faster turnaround.
Committed suppliers
We source our materials from regional partners who share our standards. Our main textile supplier is a French manufacturer whose site in Hagetmau, in the neighbouring Landes, supplies us through a short circuit — EcoVadis Platinum 2024, organic cotton and recycled textile ranges certified GOTS and GRS. Our paper comes from sustainably managed forests.
Less waste
PVC offcuts, paper and substrates are sorted and recovered; our adhesive films are available in recycled PVC. Nesting and imposition of files cut offcuts down: we print the right quantity. And low-impact inks, for prints that last.
A person, not a form
A close-knit team, from the first idea to the finished product. Every project, large or small, gets the same care. A question about your file? +33 5 33 13 02 01.
You might also like
Folding LED light totem
From €186.00
Folding LED counter
From €114.00
Hanging banner sign
From €422.40
Cardboard cube totem
From €52.80
LED light totem
From €211.20
Curved PVC counter
From €50.40
X-banner stand
From €22.80
L-Banner stand
From €33.60
Pop-up display stand
From €129.60
Pop-up counter
From €122.40
Hanging banner
From €24.00
Free-standing fabric frame
From €22.80