Hand-waving flags

From €86.40 incl. VAT

A hand-waving flag is held at arm's length: in the stands, in a parade, when welcoming a delegation or on an award podium. We print it in four-colour, single-sided, on a 110 g/m² M1-rated polyester fabric, the material offered in the configurator for this range, chosen to stay light in the hand.

Seven predefined formats, from 20x30 cm to 150x230 cm carried on a telescopic pole
PVC pole from 40 to 200 cm, telescopic up to 5 m, or graphic only if you have your own poles
Raw cut edge or sewn hems, mounted with a pole sleeve or textile adhesive

Configure my product

Reference: drpx

Configure my product

Loading options…

Templates & instructions

Technical sheet

Resolution: 300 DPI
Colours: CMYK
Bleed: 2 mm
Safety margin: 4 mm

Templates

Hand-waving flags — 100 × 150 cm Download the template
Hand-waving flags — 20 × 30 cm Download the template
Hand-waving flags — 200 × 300 cm Download the template
Hand-waving flags — 40 × 60 cm Download the template
Hand-waving flags — 60 × 90 cm Download the template
Hand-waving flags — 80 × 120 cm Download the template

One fabric in the catalogue, and that is deliberate

We do not offer hand-waving flags in ten materials: the configurator offers just one, a 110 g/m² M1-rated polyester fabric, printed in four-colour on one side. This single weight is the compromise the gesture requires: enough body for the graphic to read when the flag opens out, and little enough weight to wave it for a whole match without thinking about it. The M1 rating is a property of this fabric and applies to every format: if the rules of a venue or a trade show ask you for this information about the material, it does not change from one order to the next.

Seven sizes, from a spectator's hand to a 150 x 230 cm flag

Our predefined formats are 20x30, 30x40, 40x60, 60x90, 70x110, 100x150 and 150x230 cm, and made to measure is still possible. The first three are handed out in large numbers at the entrance to a stadium or a hall: they are held in one hand and take up little room in a box. From 60x90 upwards, the flag becomes a landmark visible from the back of the stand. The 150x230 is a format for the head of a parade or for welcoming a delegation: it is carried on a telescopic pole, with both hands.

Choose the pole to suit arm height

PVC poles come in 40, 60, 80, 120, 140 and 200 cm, and in custom lengths. A short pole can be held seated without bothering the person next to you; a 140 or 200 cm pole is raised standing up and takes the graphic above people's heads. For large formats, the telescopic pole adjusts from 150 to 300 cm or from 150 to 500 cm: it retracts for transport and extends on site, so you avoid carrying a five-metre mast fully extended. The diameter of the sleeve is also adjustable, from 1 to 5 cm, to match the chosen pole.

Pole sleeve or textile adhesive: two ways to attach the flag to the pole

The pole sleeve is a sewn channel that the pole slides into: the flag comes off and stores flat, and your poles can be reused from one season to the next. Textile adhesive fixes the flag directly to the pole: nothing slides, nothing comes apart; this is the mounting for mass giveaways where each flag leaves with its pole. Mounting can also be left out.

Hems, graphic only and production in Manciet

Without hems, the edge is left as a raw cut: this is the choice for large one-day runs, where the flag accompanies the event and then goes into a box. With hems, the edges are sewn and the flag can be brought out season after season by a club or a local authority. If you already have your poles, the graphic only option delivers the printed flag without a pole. Two production levels are available, standard or urgent, and everything leaves our workshop in Manciet: your flag is printed and finished in the Gers, 100% Made In Occitanie.

Available formats	128 formats, from 16 × 25 to 200 × 300 cm
Custom dimensions	Yes, to the nearest centimetre
Quantities	from 1 to 200 copies
Production times	Express, Urgent

Made here

94 % of our orders were produced in-house in 2024-2025, and 100 % in France. Our workshop is in Manciet, in the Gers, near Nogaro — recent machinery, local workshops. Less transport, faster turnaround.

Committed suppliers

We source our materials from regional partners who share our standards. Our main textile supplier is a French manufacturer whose site in Hagetmau, in the neighbouring Landes, supplies us through a short circuit — EcoVadis Platinum 2024, organic cotton and recycled textile ranges certified GOTS and GRS. Our paper comes from sustainably managed forests.

Less waste

PVC offcuts, paper and substrates are sorted and recovered; our adhesive films are available in recycled PVC. Nesting and imposition of files cut offcuts down: we print the right quantity. And low-impact inks, for prints that last.

A person, not a form

A close-knit team, from the first idea to the finished product. Every project, large or small, gets the same care. A question about your file? +33 5 33 13 02 01.

Discover our responsible approach →

Info

There are no reviews