Tension fabric frame
A tension fabric frame is a large-format display: the printed fabric stretches into an aluminium profile, with no visible screws or clips. It suits an exhibition stand, a reception area, a shop window or a stage backdrop, and packs flat between events. Change the fabric, keep the frame.
- Seven frame sizes, from 30x30 cm to 100x100 cm
- Three M1 fabrics: 210 g standard, 260 g black-back, 310 g backlit
- Frame with print, or print only as a replacement graphic
Configure my product
Loading options…
Templates & instructions
Technical sheet
- Resolution
- 300 DPI
- Colours
- CMYK
- Bleed
- 2 mm
- Safety margin
- 4 mm
Choosing the fabric for your tension fabric frame
The look of a tension fabric frame comes down to the textile. The 210 g standard M1 fabric suits indoor visuals mounted against a wall: it tensions easily and stays light to carry. The 260 g black-back M1 fabric is made for stage backdrops and frames seen from behind or against the light, as the black layer stops the image showing through. The 310 g backlit M1 fabric is used on a lightbox, where it spreads the light evenly. All three fabrics are listed as M1 in the configurator.
Available sizes
Seven frame sizes. 30x30 cm and 40x30 cm work as close-range signage, above a shelf or next to a till. 50x50 cm and 70x50 cm suit a welcome message or a current offer. 100x50 cm and 100x70 cm sit behind a counter or on an exhibition stand. 100x100 cm becomes the main visual, readable from the entrance of a hall. Other display supports are gathered in our point-of-sale display range.
Frame and print, or print only
Two options. Frame with print, for a first set-up. Print only, when you already own the frame and simply want a new message: you keep the aluminium profile and renew the fabric alone. It is the leaner way to refresh a campaign, and it saves buying a structure twice.
Preparing your artwork
Work at 300 DPI in CMYK, with 2 mm bleed on every edge and a 4 mm safety margin for text and logos. On this support the fabric wraps slightly around the profile, so keep anything important well inside the visual.
2M Numérique alongside you
Your frames are printed in our own workshop in Manciet: 100% Made In Occitanie, local manufacturing that is part of our responsible approach. Not sure which fabric or size fits? Tell us where the frame will stand, we will guide you and prepare a quote for your project.
Made here
94 % of our orders were produced in-house in 2024-2025, and 100 % in France. Our workshop is in Manciet, in the Gers, near Nogaro — recent machinery, local workshops. Less transport, faster turnaround.
Committed suppliers
We source our materials from regional partners who share our standards. Our main textile supplier is a French manufacturer whose site in Hagetmau, in the neighbouring Landes, supplies us through a short circuit — EcoVadis Platinum 2024, organic cotton and recycled textile ranges certified GOTS and GRS. Our paper comes from sustainably managed forests.
Less waste
PVC offcuts, paper and substrates are sorted and recovered; our adhesive films are available in recycled PVC. Nesting and imposition of files cut offcuts down: we print the right quantity. And low-impact inks, for prints that last.
A person, not a form
A close-knit team, from the first idea to the finished product. Every project, large or small, gets the same care. A question about your file? +33 5 33 13 02 01.
You might also like
Cardboard cube totem
From €52.80
In the same category
Pavement sign
From €104.40
Bollard cover
From €51.60
Cardboard cube
From €22.80
Counter display stand
From €570.00