The folding LED counter is a backlit reception desk that opens without tools. The collapsible frame travels in a carry bag and goes up in a few moves, which suits trade fairs, open days and roadshows. The printed front panel is lit from behind, so your message holds up under the spotlights of an exhibition hall.
- Size 100x100
- Frame plus print, print only, or a replacement frame
- LED backlit front panel
The pop-up counter takes its name from its frame, which opens in a single movement. Light and quick to set up, it works as a welcome desk, a demo table or a tasting point at a trade show, a market or an open day. The printed graphic wraps the frame, while the top holds brochures, samples or a card reader.
- Size 100x100
- Black top, wood-finish top, or no top
- Frame plus print, print only, or a replacement frame
The curved PVC counter is a welcome desk with a rounded front, dressed in your own printed graphic. The curve softens the corner of a stand and guides visitors towards the person receiving them. It works at trade shows, in a company lobby, at the entrance of a showroom or for an in-store promotion.
- Size 90x90x47
- PVC front printed with your artwork
- Frame plus print, print only, or a replacement frame
The free-standing fabric frame stands on its own, with no wall and nothing to hang it from: a structure over which a printed textile is stretched. It works as a backdrop, a stand partition, a divider in a foyer or a welcome wall at an exhibition, a conference or a general meeting. The fabric comes off and is replaced; the frame stays.
- Three sizes: 70 x 100, 100 x 200 and 200 x 200 cm
- Standard 210 gsm, Black Back 260 gsm or Backlight 310 gsm fabric
- Double-sided printing, plain or LED frame, reprint of the graphic alone
A hanging banner sign is fixed overhead, above a stand or a retail area, and can be spotted from the far end of a hall. Round or square, it carries your name above the crowd, where no partition hides it. Trade shows, showrooms, sports halls: it claims a territory without taking a single square metre of floor.
- Square 1500x800, 3000x1000 and 4500x1500 mm; round 1500, 3000 and 4500
- Printed on blockout satin fabric
- Frame plus print or print only, sling kits of 3, 4 or 5
A hanging banner shows a large graphic without taking up any floor space. Fixed to a ceiling, a beam or a railing, it marks out a stand, a shop entrance, a meeting room or a reception hall. We print graphics from 40 x 100 cm up to 200 x 200 cm, with or without the hanging hardware. It belongs to our exhibition stand range.
- Sizes from 40 x 100 cm to 200 x 200 cm, portrait or square
- Materials: 200 gsm photo poster, M1 fire-rated, grey-backed fire-rated polyester
- Grey rails from 40 to 200 cm, black in 60 and 100 cm, or print only
The L-Banner stands on its own: a foot on the floor, a pole rising at the back, and the fabric held taut between the two. The L-shaped profile gives it both its name and its stability. Set it at the entrance to a trade show, in a lobby, behind a reception desk or at an open day, then pack it flat. It is part of our banner range.
- Two portrait sizes: 80 x 200 cm and 100 x 200 cm
- Standard printed material, or M1 fire-rated for public venues
- Frame and print together, print only, or a replacement frame on its own
A custom printed tablecloth turns an ordinary table into brand surface: logo, strapline and colours run across the whole visible drop. It works on a trade-show stand, a farmers' market pitch, an open day or an awards night. The fabric is printed and then made up to the chosen size, with a hemmed edge all round that holds the cut over time.
- Five sizes: 100x100, 150x150, 150x200, 150x260 and 350x170.
- Decotex 220 g/m2 or standard 210 g/m2 fabric, both fire-rated M1.
- Single-sided print across the full surface, hemmed on four sides.
A photocall backdrop puts your identity behind every picture: repeated logos, partner marks, the event hashtag. Guests, press and staff line up in front of it, and every shared photograph carries your brand long after the evening ends. Openings, awards nights, weddings, press conferences and product launches all use one as their entrance set.
- Five sizes, from 200x200 cm to 290x290 cm.
- Single or double-sided printing across the full surface.
- Frame and print together, or a replacement print on its own.
The pop-up display stand is a backdrop that goes up in minutes: the umbrella frame opens out, the graphic clips onto it and the whole wall stands on its own. It works at trade shows, careers fairs, open days and showrooms. Folded down, it packs small and travels from one date to the next.
- Five sizes: curved M and L, straight M, L and XL.
- 260 g black-back fabric, 210 g standard fabric, both M1 rated, or 260 g canvas.
- Frame only, graphic only, or frame and graphic together.
A fabric display wall closes the back of your stand with one seamless image. A straight or curved tubular frame carries a stretch-knit cover that slides on like a garment and tensions itself. Trade shows, congresses, showrooms and reception halls use it as their main backdrop. The cover can be replaced on its own from one event to the next, with no new frame to buy.
- Eight sizes, from 235 x 238 cm to 595 x 238 cm.
- 260 g/m2 stretch knit fabric, printed edge to edge.
- Double-sided, straight or curved frame, optional blackout lining.
The folding LED light totem travels with teams that move. The frame folds down after the event, which matters when three exhibitions follow each other in a month and everything has to fit in a van. Once opened, it presents a backlit 100x200 cm visual that reads from the far end of an exhibition aisle.
- Single size, 100x200 cm, portrait
- Folding frame, LED backlighting
- Frame with print, print only, or replacement frame
The LED light totem is a backlit column that holds one visual in full light, morning to evening. Placed in a lobby, a window, a showroom or on an exhibition stand, it keeps attention where a matt poster blends into the background. The printed panel can be replaced without touching the frame: the totem stays, the message moves on.
- Single size, 100x200 cm, portrait
- LED frame, backlit visual
- Frame with print, print only, or replacement frame
The cardboard cube totem is a stack of printed cubes that builds a focal point in store. Every face carries its own visual: product shot, key benefit, instructions, brand message. It goes up at the end of an aisle, in a lobby or on a stand, and comes down just as quickly. Square or triangular section, depending on the space you have.
- Five build-ups, from 127x45 to 214x45 cm
- E-flute board with a white liner
- Single-sided printing on the visible faces
The premium fabric totem holds a tensioned visual with a matt finish, free of the glare that spoils a print under direct light. The 190 g stretch knit slips over the frame like a cover and pulls itself taut. Three widths share the same 238 cm height, so you pick by wall, corner or corridor. The frame can be ordered with the print, or left out if you already own one.
- 60x238, 90x238 or 120x238 cm
- 190 g stretch knit, matt finish
- Frames in 60, 90 or 120 cm, or print only
The triangular cardboard totem is a three-sided advertising column, built from a single folded sheet of board. It stands on its own and carries your message over its full height, at eye level. Use it in a shop, in a reception area, at a trade show or during a promotion running for a few days.
- One size: 46.6 x 190 cm.
- 390 g board, rigid yet light to move.
- Three printed faces, readable from every approach.
The elliptical cardboard totem is a free-standing display printed on board and assembled into a rounded column. Its curved shape catches the eye at the end of an aisle, on a trade show floor or beside a shop entrance. It stays light, so one person can move it between promotions during the day. The whole visible surface carries your artwork.
- Two sizes: 40x156 cm and 50x190 cm
- 390 g board, printed and then cut to shape
- Free-standing elliptical volume, no separate frame
The X-banner stand is a light display whose cross frame tensions the print from its four corners. It goes up in a few moves, stands on its own and takes little room once packed away, which makes it the back-up display of trade shows, open days and in-store promotions. Print and frame can be ordered together or on their own.
- Two sizes: 60x160 and 80x180 cm
- Standard material or M1 fire-rated material
- Frame with print, print only, or frame only
