Which telescopic beach flag set-up do you need?
The telescopic beach flag combines a printed sail with an adjustable pole. The full kit brings together pole, sail and fittings, which is what a first order usually calls for. The pole on its own replaces hardware worn out by a season outdoors. The opposite option, sail only, refreshes the artwork while you keep the pole already in use. Weighting is chosen separately: the 14 L base is filled with water on site and emptied before you leave, so nothing heavy travels with you, while going without a base makes sense if you already own a cross foot or a ground spike.
Available sizes
The sail is produced at 2.5 m high. It clears the crowd at a market or a fair, stays manageable for one person and fits in a car boot once the pole is collapsed. Other shapes sit next to it in our beach flag range.
Single-sided and double-sided printing
Printed on one side, the artwork shows through in mirror image on the back, which suits a logo or a simple pictogram. Double-sided printing assembles two panels so both faces read the right way round, a real help when visitors approach from either direction or when the message contains text. The configurator also lets you order the hardware with no printing at all.
Preparing your artwork
Work at 300 DPI in CMYK, allow 2 mm of bleed and keep a 4 mm safety margin. Keep type away from the left edge, which disappears into the sleeve holding the pole. Remember that the sail moves in the wind: a bold, contrasted design reads from far further away than a busy one.
2M Numérique at your side
Your beach flag is printed in our own workshop in Manciet, in the Gers, south-west France: 100% Made In Occitanie. The same thinking runs through our responsible approach. Tell us about the event, the wind exposure and how many flags you need, and we will study the project with you.