Frame, print: what to order
The curved PVC counter is configured in three ways. “Frame + print” delivers the unit and its graphic, for a first set-up. “Print only” renews the graphic on a counter already in use, typically when your branding or campaign changes. “Replacement frame” renews the hardware when the artwork is still good. The other models sit in our stand welcome counters range.
Available size
One size: 90x90x47. The square front carries the graphic, while the 47 depth leaves room for a laptop, a till or a stock of brochures without turning the counter into an obstacle. It fits the corner of a stand as easily as a busy corridor.
The curve as a layout choice
A rounded front has no sharp edge: people move around it more easily in a narrow aisle, and it avoids the barrier effect of a flat panel. The artwork runs continuously, with no break across the middle of a logo. That continuity is worth planning for: a panoramic image, a colour gradient or a repeated motif follows the curve far better than a composition built around a straight central axis, and the curve also catches the light differently across its width, which gives the panel a little relief on a flat exhibition floor.
Preparing your artwork
Send a 300 DPI file in CMYK, with 2 mm bleed and a 4 mm safety margin. On a curved front, keep fine text away from the outer edges: the panel is read at an angle and the sides appear foreshortened.
2M Numérique alongside you
The curved PVC counter is printed in our workshop in Manciet, in the Gers, along with the rest of our stand display range: local manufacturing, 100% Made In Occitanie, in keeping with our responsible approach. Send us your project and we will look at it with you.